Loading…

Endeavour Energy Safety Training

Endeavour Energy Training

Our Endeavour Energy Aligned Courses

CTC Safety is an Endeavour Energy approved Registered Training Organisation (RTO) delivering Endeavour Energy aligned mandatory training and Electrical Safety Rules (ESR) refresher training to ASPs and contractors.

"Our trainers and Assessors are authorised by Endeavour Energy and are electrically qualified"

 

 

Click on the above links for more course information.

 

 

If you need help or are not sure what training your workforce needs or would like to book over the phone call us on 1300 386 263 or email us by clicking here

Public and Group bookings are available at our training centres located at Tuggerah - Central Coast, Emu Plains - Sydney and Port Kembla - Illawarra.

Onsite group bookings are also available for most of these courses NSW wide. *Discounts apply for group bookings

 

Endeavour Energy ASP and Contractor Authorisation Training 

Minimum mandatory initial / refresher training requirements for all individuals who are required to work on, or near, Endeavour Energy's network (Including Excavation Authorisations).

  • *Endeavour Energy's Electrical Safety Rules (ESR)
  • HLTAID001 - Provide Cardiopulmonary Resuscitation
  • UETTDRRF06 - Perform rescue from a live LV panel
  • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus (Endeavour Energy Electrical Safety Rules Aligned)
  • UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure (Endeavour Energy Electrical Safety Rules Aligned)
  • UETTDRRF10 - Provide first aid in an ESI environment 

Optional mandatory initial / refresher training requirements for all individuals who are required to work in the vicinity of overhead mains.

  • UETTDRRF02 - Provide Pole Top Rescue - Mandatory if an individual is required to conduct or observe work in the vicinity of overhead mains from a ladder or pole
  • UETTDRRF03 - Perform EWP Rescue - Mandatory if an individual is required to conduct or observe work in the vicinity of overhead mains utilising an EWP
  • UETTDRRF08 - Provide EWP Controlled Decent Escape (CDD) - Mandatory if an individual is required to conduct work in the vicinity of overhead mains utilising an EWP
  • UETTDREL14 / UETTDREL16 - Working safely near live electrical apparatus - Mandatory if an individual is required to operate or observe crane and plant (Including an EWP) operating in the vicinity of overhead mains

*Note: Initial ESR must be undertaken direct with Endeavour Energy. CTC Safety can only refresh your ESR training. 

 

Refresher Training           Course Dates

Initial Training                   Course Dates

 

Endeavour Energy Excavation Authorisation Training

 

 

Click on the above link or scroll down for more course information. If you need help or are not sure what training your workforce needs, call us on 1300 386 263

 

Overhead Plant - Authorisation to Operate or Observe Plant Near Overhead Electrical Apparatus

Scope of activities covered by this authorisation:

  • Operate plant up to the safe approach distances provided in Table A - Safe Approach Distances for Authorised Persons and Instructed Persons, in the electrical safety rules handbook, whilst an authorised safety observer is in place; and 
  • Observe plant that is operated by an authorised operator up to the safe approach distances provided in Table A - Safe Approach Distances for Authorised Persons and Instructed Persons, in the electrical safety rules handbook

Scope of activities not covered by this authorisation function:

  • Cannot carry out or observe powered excavation work near the network

Pre-requisite requirements:

  • CPCCWHS1001 - Work safely in the construction industry (NSW White Card or equivalent)

Initial Training and ongoing Annual Refresher Assessment: 

  • UETTDREL14 - Working safely near live electrical apparatus as a non-electrical worker
  • Endeavour Energy's Electrical Safety Rules (ESRs), which includes:
    • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus (Endeavour Energy's Electrical Safety Rules Aligned)
    • UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure (Endeavour Energy's Electrical Safety Rules Aligned)
  • UETTDRRF06- Perform rescue from a live LV panel
  • HLTAID001 -  Provide Cardiopulmonary Resuscitation
  • UETTDRRF10 - Provide first aid in an ESI environment 

*Initial ESR must be undertaken direct with Endeavour Energy. CTC Safety can only refresh your ESR training. 

*Public, group and onsite bookings are available for this course. **Discounts apply to group bookings. 

Course Dates

 

Excavation - Authorisation to Observe Excavation Work Near the Network

Scope of activities covered by this authorisation:

  • Observe powered excavation activities carried out by an authorised operator in accordance with the Electrical Safety Rules Handbook

Scope of activities not covered by this authorisation function:

  • Cannot carry out powered excavation work near the network
  • Cannot operate or observe plant near overhead electrical apparatus

Pre-requisite requirements:

  • CPCCWHS1001 - Work safely in the construction industry (NSW White Card or equivalent)

Specific training requirements:

  • RIICCM202E - Identify, locate and protect underground services

Initial Training and ongoing Annual Refresher Assessment: 

  • Endeavour Energy's Electrical Safety Rules (ESRs), which includes:
    • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus (Endeavour Energy's Electrical Safety Rules Aligned)
    • UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure (Endeavour Energy's Electrical Safety Rules Aligned)
  • UETTDRRF06 - Perform rescue from a live LV panel
  • HLTAID001 -  Provide Cardiopulmonary Resuscitation
  • UETTDRRF10 - Provide first aid in an ESI environment 

*Initial ESR must be undertaken direct with Endeavour Energy. CTC Safety can only refresh your ESR training. 

*Public, group and onsite bookings are available for this course. **Discounts apply to group bookings. 

Course Dates

 

Excavation - Authorisation to Carry Out Powered Excavation Work Near the Network

Scope of activities covered by this authorisation:

  • Observe and carry out powered excavation activities carried out by an authorised operator in accordance with the Electrical Safety Rules Handbook

Scope of activities not covered by this authorisation function:

  • Cannot operate or observe plant near overhead electrical apparatus

Pre-requisite requirements:

  • CPCCWHS1001 - Work safely in the construction industry (NSW White Card or equivalent)

Specific training requirements:

  • RIICCM202E - Identify, locate and protect underground services

Additionally, in order to gain authorisation to carry out excavation near the network, a person must complete a practical Verification of Competency (VOC) by  CTC Safety in accordance to Endeavour Energy's Safety Rules 

  • FAM0061 Endeavour Energy Excavation VOC

Initial Training and ongoing Annual Refresher Assessment: 

  • Endeavour Energy's Electrical Safety Rules (ESRs), which includes:
    • UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work on or near electrical apparatus (Endeavour Energy's Electrical Safety Rules Aligned)
    • UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure (Endeavour Energy's Electrical Safety Rules Aligned)
  • UETTDRRF06 - Perform rescue from a live LV panel
  • HLTAID001 - Provide Cardiopulmonary Resuscitation
  • UETTDRRF10 - Provide first aid in an ESI environment 

*Initial ESR must be undertaken direct with Endeavour Energy. CTC Safety can only refresh your ESR training. 

*Public, group and onsite bookings are available for this course. Specific site training condition apply to this course.**Discounts apply to group bookings.

Course Dates


*,** See CTC Safety Training Agreement.